Bezzera BZ07 Commercial Espresso Machine - PM, semi-automatic, tank, PID, V2

The Bezzera now with PID temperature control on heat exchanger boiler.

This beautiful and compact stainless steel espresso machine can be a fine addition to any home! There are many benefits and a solid performance that can be found from the following features on this espresso machines:

This machine is classified as a semi-automatic whereby the operator of the machine presses the coffee button to start the espresso extraction and depresses the same button to stop the espresso extraction.

The BZ07's grouphead houses two electric heating elements and a thermostat to monitor temperature at the grouphead, and the boiler pressure/temperature is monitored by a PID microprocessor and PID sensor in the boiler.

Features:

• Multi-directional steam and hot water wands.
• Lever-type, spring-loaded steam and hot water valves.
• Thermostat-controlled heated 58mm grouphead.
• All stainless steel body polished to a mirror finish.
• Removable three (3) liter water reservoir.
• Low water level switch turns off power when reservoir water level gets to low.
• Vibration pump installed with air release valve.
• Vacuum breaker valve to allow machine to be placed on a timer.
•  NSF approved Nistla (nickel) plated copper boiler. 
• Overpressure valve (9 bar OPV) adjustable to change exiting overpressure created by pump.
• Circuitry for automatic refill of internal boiler from water reservoir.
• Three (3) way solenoid valve for quick removal of portafilter after espresso extraction.
• Accessories: dual spout portafilter, 2-cup filter basket, 1-cup filter basket, plastic tamper, grouphead cleaning brush, and blind filter basket.

Details and Specifications:

Measurements: 14.75" H x 9.5" W x 16.75" D (37.5 cm H x 25 cm W x 42.5 cm D)
Weight: 41.89 pounds (19 kilograms)
Power: 1400 watts, 110-120 volts, 50-60 hertz, 15 amps
Heating element: 1200 watts
Water tank capacity: 0.79 gallons (3 liters)
Boiler capacity: 0.4 gallons (1.5 liters)
Country of manufacture: Milan, Italy

Additional Notes:

1. Discontinued? There is a rumor going around that this model is being discontinued and being replaced by the BZ10. This is not true.
2. "White" body panel: Some machines come with a thin white coating that can easily be peeled off.
3. Differences between BZ02 and BZ07 models:
   1. The BZ02 has plastic side panels with a stainless steel rear, and the BZ07 as stainless steel wraparound body.
   2. The BZ07 is a narrower machine, and due to this, the water wand and steam wand are very close to each other.
   3. The steam wand and hot water wand are on a bi-directional, horizontal axis for rotation while the same on the BZ07 is multi-directional.
   4. The grouphead on the BZ02 is welded to the boiler and the heat transfers passively while the BZ07 has a heating element with a thermostat to control temperature.
   5. The steam and hot water wands are controlled by a rotational knob on the BZ02 and a spring-loaded handle on the BZ07.
4. Grouphead: The brew group size of this machine is 58 mm. It will not fit standard E61 portafilters or other E61 parts.
5. Direct connect option: We only sell the tank models at this time. There currently is no retro fit to turn it into direct connect.
6. Steam tips: We have confirmed the GoldPro2Hole steam tip does not fit into this machine. We don't have any alternative steam tips at this time.